Picture Framing Equipment - Selling Used Picture Framing Tools, Equipment

Hand Tools / Fixtures / Supplies

This page is current as of 8/23/2010.

Silentaire Air Compressor - Model 50-24 Silent Air Compressor, NEW from factory, 1/2 HP, 110/220 volts, Noise Level 40 Decibels, 6 gallon tank, 84 - 114 PSI Operating range, priced at $915 FOB Houston, TX. (Item 259-0409-A1) Other models available but this model is very popular in many frame shops.

Click for More Pictures

Jun-Air Silent compressor - Very clean, mfg in 1994, runs great, priced at $475 FOB Atlanta.

12" Motorized Disk Sander - 1.25HP electric motor, in very good condition, priced at $250 FOB Atlanta. (Item 285-1109-H1)

10" Motorized Disk Sander - Electric sander, in good condition, priced at $150 FOB Atlanta. (Item 305-610-H1)

Fillet Cutter - by ITW, in great condition, comes with 43 " measuring arm and owner's manual, priced at $280 FOB Atlanta. (Item 290-1209-H2)

Fletcher Fillet Cutter - in very good condition, comes with a 51" measuring arm and owner's manual, priced at $280 FOB Atlanta. (Item 305-610-H3)

Frame Square Fillet Cutter - in good condition, comes with a 52" measuring arm and owner's manual, priced at $280 FOB Atlanta.

Fletcher Fillet Master - For measuring accurate fillets and not having to cut multiple cuts, accurate the first time, priced at $125 FOB Atlanta. (Item 305-610-H4)

Fletcher Angle Guide - for use with the Fletcher F-2100 or F-2200 mat cutters, priced at $40 FOB Atlanta.

Master Clamps - for shadow boxes, in like new condition, priced at $250 each, FOB Atlanta. (tem 287-410-H1) Check this reference: http://www.mmdistributors.com/MASTER-CLAMP-III-Shad-Box-2-1-2-Wide-X-2-16-Inches-p/5107.htm

Anaconda Vice - Opens to 6 1/2" wide, 2 each available, priced at $80 each FOB Atlanta.

Lite-Grip - By Fletcher, used to make cleaning and cutting glass safe, has non-skid surface to keep glass from sliding, eliminates the need of a particle free cleaning space, NEW in box with owner's manual, priced at $125 FOB Atlanta. (Item 279-1009-H2)

Click to Enlarge

Miter Vice, swivels and tilts, has speed handles, excellent condition, I currently have vices available, priced at $50 fob Atlanta. (Item # 246-H)

Vertical Paper Dispenser - In new condition, Bullman 36" vertical paper dispenser, priced at $90 FOB Atlanta. (Item 279-1009-H2)

Fletcher Mulitpoint Driver - In new condition, improved holding power and reduces the number of points needed per frame, priced at $70 FOB Atlanta. (ttem 279-1009-H1)

Senco Pneumatic Nailer - Model SLP20, uses 18 gauge brads, sizes noted above in pictures, in good condition, priced at $60 FOB Atlanta. (Item # 246-H1013)

Pneumatic Nailer - (Item # 243-H1002) Senco Model SLP20, 18 gauge, sizes 5/8" to 1 5/8" or 16mm to 41mm, two years old, comes with plastic case and owner's manual, priced at $75 FOB Atlanta.

Pneumatic Stapler - (Item # 243-H1001) Senco Model SFW10XP, sizes - 3/8" to 5/8" or 10mm to 16mm, two years old, with owner's manual, priced at $100 FOB Atlanta.

Selector II Tacking Iron - by Seal for tacking dry mounts, heat range low-medium-high, priced $40 FOB Atlanta.

Click for More Pictures

Bag Sealer - Uline model H-1029 Impulse Sealer, 20" size, comes with new roll on continuous feed bag material, 2 new heating elements for machine, purchased 2 years ago, priced at $125 FOB Atlanta.

Seal Perforator - a 5 wheel hand held piercing tool for perforating Print Guard films. For use when laminating non-porous materials. Like new condition, priced at $30 FOB Atlanta.

Click to Enlarge

Pneumatic Brad Gun - 18 gauge brad gun by Porter Cable, model BN125, Type1 s/n 127173, priced at $65 fob Atlanta.

ATG 700 Tape Gun - $22 FOB Atlanta. Check for availability.

Strap Clamp - Place equal clamping pressure on the whole frame. Priced at $10 FOB Atlanta.

click to enlarge

Morso and Jyden Chopper Blades -----

Used - $85 per set for (OEM) name brand blades

Used - $65 per set for generic brand blades

New - $225 per set for Morso or Jyden generic brand blades

(NOTE: Currently out of used Jyden blades.) Prices fob Atlanta.

Frame Square Fillet Cutter Blades - (used) $12 fob Atlanta.

Cassese V Nails from Vnail.com in their value pack where you mix up and choose several sizes in the same box. This is the result of combining 2 partial boxes that have all the nails pictures (13 sleeves total). Priced at $15 FOB Atlanta.

Fixture for Backroom - adjustable shelf, Formica covered, measures 24" deep by 36" wide by 36" tall, multiple units available - 6 units were used to make large work table with shelves below, work table top (5' by 9') also available, price $50 per unit. FOB Atlanta.

Moulding Separator Rack - with bottom trough, sections are 79" long, easy hang system on wall mounting, see small picture above - angled strip is installed on wall and the rack is hung with the angled mate shown above on the back of the section. Priced at $45 per section FOB Atlanta. (Item 263-0509-F1)

Pistorius Nails - 2 full boxes, size noted above, new, priced at $30/box FOB Atlanta.

Counter Top Display - In excellent condition, 30" tall and 9" wide panels, rotates on base, priced at $60 FOB Atlanta. (Item # 239-S1010)

Taururs Underpinner V-Nail Cartridges - 7mm, 10mm, and 15mm sizes, new, call for pricing.

Corner Sample Holder - Custom made, in excellent condition, on casters so it rolls easy andywere, each corner sample holder can be moved to the top of the cart as needed, measures 20" wide, 30" deep, and 34" tall, each sample holder is 25" long, priced at $150 FOB Atlanta.

Open sign measures 27" tall, pull switch on/off, priced at $75 FOB Atlanta.

Click to enlarge

Verifone Credit Card Terminal / Printer / Pin Pad - Terminal/printer Model Number - Nurit 2085, Pin Pad Model Number 1000SE. Priced at $300 fob Atlanta.