Moulding Joining Equipment


NEW V-Nails from OEM

Price Depends on Size

Nails for A-Plus Automation, and AMP-Fletcher machines ….

7 MM – 4,000 Nails per Box – $24 plus shipping

10 MM – 3,000 Nails per Box – $20 plus shipping

15 MM – 2,000 Nails per Box – $17 plus shipping

Underpinner with Stand by Pilm

$1,400

Pilm Underpinner – With tilting stand and 38″ by 38″ work table – In good condition, has been stored for several years, the Pilm brand is now supported by A+ Automation so there is no issue with part support, comes with tool box built into stand and includes one box of nails and compensators for 7 mm, 10 mm, and 15 mm nails.  It has two different type of vertical hold down fixtures for different moldings.  Priced at $1,400 plus shipping from Atlanta.

Amp  Underpinner, Model VN-42

$1,750

ITW Amp Underpinner (Now Fletcher-Terry), Model VN42, in very good condition, Comes with positive stop vertical hold down retrofit kit installed, 7 mm, 10 mm, and 15 mm Nail Heads, hold down pads and Owner’s Manual.  This model is a favorite of many frame shops with the nail head moving beneath the moulding.  The operator can set upper and lower limits with any number of nails inserted between the limits.  Nails are fired with a thumb switch on top of the “joy stick” that moves the nail head to next position for inserting a nail.  This model underpinner comes with an adjustable stand standard.  Priced at $1,750 FOB Atlanta.

Amp  Underpinner, Model VN-4, 3 Position

$1,550

ITW Amp Underpinner (Now Fletcher-Terry), Model VN4, 3 Position –  in good condition, with rebuilt “Z” cylinder and all other cylinders and valves checked out for proper function.  Comes with 7 mm, 10 mm, and 15 mm Nail Heads and hold down pads and Owner’s Manual.  Head moves beneath the moulding to positions you set (X, Y, and Z positions).  Priced at $1,550 for Underpinner, FOB Atlanta.